Smoke Tracer Products 
Contact Us Product Center Order Products
W hen the need arises where ADIís Ball-In-Tube Indicator is not practical, for example seeing the direction of airflow in a corridor between buildings, between rooms or air patterns within a room, ADI has your solution . . . ADITM Smoke Tracers! 

MODEL 24HR-PUFFER-10PK: 10-Pack of           24 hour Puffers
MODEL 24HR-PUFFER-SINGLE: Single 
            24 hour Puffer

Note the 24 hour puffer bottle is made of low density polyethylene (LDP) and once the puffer is activated, the puffer can be used for up to 24-hours, but no more and must be properly discarded. IF YOU THINK THE PUFFER MIGHT, BY INTENT OR BY ACCIDENT, NOT BE PROPERLY DISPOSED OF AFTER 24 HOURS, ORDER THE TEFLON REUSABLE PUFFER MODEL BELOW INSTEAD.
Note that titanium tetrachloride is a corrosive. Read and understand all safety information before using.
Great for seeing airflow direction when ADIís Ball-In-Tube indicator is not practical, e.g. airflow direction in hallways and within a room. After activation, each Puffer generates from 100 to 200 or more puffs of highly visible, long lasting white smoke. To use Puffer, simply point and squeeze.
The Puffer consists of a disposable flexible plastic dispenser with a small glass vial of titanium tetrachloride inside. The vial is cushioned to help prevent breakage until ready to use. Shelf life of a Puffer before being activated is indefinite (with proper storage.)
To activate the Puffer, the plastic dispenser is carefully crushed under foot. Titanium tetrachloride in the glass vial is released and combines with atmospheric moisture to form dense, persistent smoke. After removing cap from dispenser spout, smoke can be emitted in discrete puffs or a long stream, depending on how the dispenser is squeezed. Smoke is conserved between applications by replacing the cap. 
The Puffer is 5-3/4" high overall including the spout. 


MODEL TEFKIT PUFFER: One Reusable Smoke Kit
MODEL TCL4 REFILLS:: Refills (1dozen)
MODEL SPOUTS:
LDP Spouts (1dozen)

Note that titanium tetrachloride is a corrosive. Read and understand all safety information before using.
The Reusable TEFKIT Puffer offers many of the features of the Puffer combined in a reusable, unbreakable Teflon* dispenser body, which, like glass, is virtually impervious to titanium tetrachloride.
The Reusable Teflon puffer body is 2-3/8" in diameter by 5-1/4" high and is filled with cotton. Replaceable screw-on plastic Low Density Polyethylene (LDP) dispenser spouts add 1-3/8 inches to the height. Note that with use, the LDP plastic dispenser spouts will decay and must be replaced. Four are supplied with each kit. A flat Teflon screw-on cap is also supplied for long term storage of unused smoke between application.
To use the Teflon Reusable Puffer, load the contents of a refill vial into the dispenser body and screw-on a dispenser spout. Titanium tetrachloride combines with atmospheric moisture to form dense, persistent smoke. Smoke is emitted in discrete puffs or in a long stream, depending on how the dispenser body is squeezed.
Each refill vial provides from 250 to 500 or more puffs of smoke. The kit includes the Teflon Puffer bottle, four TCL4 refill vials, a storage cap, four LDP dispenser spouts and instructions contained in a handy high-impact plastic carrying case.
* "Teflon" is a registered trademark of E.I. du Pont de Nemours & Co. Inc.